Asus P2B-D2 - Manual (Page 27)

ASUS P2B-D2 User’s Manual 27
III. INSTALLATION
3. Parallel Connector (25-pin PRINTER)
You can enable the parallel port and choose the IRQ through “Onboard Parallel
Port” in Chipset Features Setup of the BIOS SOFTWARE. NOTE: Serial print-
ers must be connected to the serial port.
Parallel Port (25-pin female)
4. Serial Port Connector (9-pin COM1)
One serial port is ready for a mouse or other serial devices. A second serial port
is available using a serial port bracket connected from the motherboard to an
expansion slot opening. See “Onboard Serial Port” in Chipset Features Setup of
the BIOS SOFTWARE for settings.
Serial Port (9-pin male) COM 1
5. Monitor Output Connector (15-pin VGA)
This connector is for output to a VGA-compatible device.
VGA Monitor (15-pin female)
Connectors
III. INST
ALLA
TION