Asus P5Q PRO - Manual (Page 93)

ASUS P5Q PRO 3-27
3.5.4 Onboard Device Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Onboard Device Configuration
High Definition Audio [Enabled]
Front Panel Type [HD Audio]
SPDIF_OUT Mode Setting [SPDIF Output]
Marvell IDE [Enabled]
Marvell IDE Boot ROM [Enabled]
Atheros GigaBit LAN [Enabled]
LAN Boot ROM [Disabled]
LSI Firewire 1394 [Enabled]
Serial Port1 Address [3F8/IRQ4]
Enable or Disable
High Definition Audio
Controller
High Definition Audio [Enabled]
Allows you to enable or disable the High Definition Audio Controller.
Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to set the front panel audio connector (AAFP) mode to legacy
AC’97 or high-definition audio depending on the audio standard that the front
panel audio module supports. Configuration options: [AC97] [HD Audio]
SPDIF_OUT Mode Setting [SPDIF Output]
Allows you to set the SPDIF output mode. If your VGA card has HDMI output
and need to use SPDIF signal from SPDIF_OUT header, you need to change
HDMI Output for HDMI audio output. Configuration options: [SPDIF Output]
[HDMI Output]
Marvell IDE [Enabled]
Allows you to enable or disable the onboard Marvell IDE controller.
Configuration options: [Enabled] [Disabled]
Marvell IDE Boot ROM [Enabled]
This item appears only when you set the previous item to [Enabled].
Configuration options: [Disabled] [Enabled]
Atheros GigaBit LAN [Enabled]
Allows you to enable or disable the onboard Atheros LAN port.
Configuration options: [Enabled] [Disabled]
LAN Boot ROM [Disabled]
This item appears only when you enable the previous item.
Configuration options: [Disabled] [Enabled]
BIOS SETUP UTILITY
Advanced