Asus P5Q PRO - Manual (Page 106)

3-40 Chapter 3: BIOS setup
3.8.2 Drive Xpert
Drive Xpert Control [Auto]
This item allow you to enabled or disabled the function of Drive Xpert Control.
Configuration options: [Auto] [Enabled] [Disabled]
Drive Xpert Mode Update [Current setting]
Set this item to [Mode change] to show further settings of the Drive Xpert feature.
Configuration options: [Current setting] [Mode change]
Update To Super Speed [Press Enter]
This item appears only when the Drive Xpert Mode Update item is set to
[Mode change] and allows you to use Super Speed function. Plug two
identical SATA hard drives in the SATA_E1 (orange, port 0) and SATA_E2
(white, port 1) connectors on the motherboard and press the key.
Update To EZ Backup [Press Enter]
This item appears only when the Drive Xpert Mode Update item is set to
[Mode change] and allows you to use EZ Backup function. Plug two identical
SATA hard drives in the SATA_E1 (orange, port 0) and SATA_E2 (white, port
1) connectors on the motherboard and press the key.
Make necessary backup before using the Drive Xpert function:
• All original data of the hard drive connected to the SATA_E2 (white, port 1)
connector on the motherboard will be erased for EZ Backup setup
• All original data of the two hard drives will be erased for Super Speed
setup.
Update To Normal Mode [Press Enter]
This item appears only when the Drive Xpert Mode Update item is set to
[Mode change] and allows you to use the SATA_E1 (orange, port 0) and
SATA_E2 (white, port 1) connectors as normal SATA connectors.