Asus P5Q PRO - Manual (Page 150)

4-38 Chapter 4: Software support
EZ Backup
To start EZ Backup configuration:
1. Click EZ Backup from the main screen.
2. Check if the SATA cables
and power cords are installed
properly. Click Next to continue.
3. Click Next to continue the
configuration.
4. All original data on the hard
drive connected to the SATA_E2
(white, port 1) connector on the
motherboard will be erased.
Make necessary backup before
proceeding. Click Next to
continue.
5. The setup is completed. Click
OK to close the configuration
window.