Asus MAXIMUS VI EXTREME - Manual (Page 89)

ASUS MAXIMUS VI EXTREME 2-25
Chapter 2
2.4.3 Setting up your OC Panel in Extreme Mode
The OC Panel in Extreme Mode is setup with an open chassis system or “open-air” OC
test bed assembly and enjoyed as a handheld console to perform overclocking and voltage
tuning.
When in Extreme Mode, you can enjoy more features including Subzero Sense and VGA
Hotwire. It also comes with some of the most commonly used voltage tuning presets that are
preconfigured for your convenience and optimum overclocking experience.
To setup the OC Panel in Extreme Mode:
1. Shut down your computer.
2. Connect the OC Panel cable (A) and a
SATA Power cable (B) to the OC Panel.
3. Locate the ROG_EXT connector on the
motherboard and connect the OC Panel
cable.
4. Boot your computer.
5. Press the OC Panel power button to turn on the OC Panel LCM display.