Asus MAXIMUS VI EXTREME - Manual (Page 107)

ASUS MAXIMUS VI EXTREME 3-17
Chapter 3
CPU Current Capability [Auto]
DIGI + VRM CPU Current Capability provides wider total power range for overclocking.
A higher value setting gets higher VRM power consumption delivery and extends the
overclocking frequency range simultaneously.
Configuration options: [Auto] [100%] [110%] [120%] [130%] [140%]
Choose a higher value when overclocking or under a high CPU loading for extra power
support.
CPU Power Thermal Control [130]
A higher temperature brings a wider CPU power thermal range and extends the
overclocking tolerance to enlarge the O.C. potential. Use the <+> and <-> keys to
adjust the value. The values range from 130 to 151.
DO NOT remove the thermal module. The thermal conditions should be monitored.
CPU Input Boot Voltage [Auto]
VCCIN for the CPU right at boot. Configuration options: [Auto] [0.800] – [2.440V]
DRAM Current Capability [100%]
A higher value brings a wider total power range and extends the overclocking range
simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
DRAM Voltage Frequency [Auto]
Allows you to adjust the DRAM switching frequency. Assign a fixed high DRAM
frequency to increase the overclocking range or a low DRAM frequency for a better
system stability.
Configuration options: [Auto] [Manual]
The following item appears only when you set set the DRAM Frequency Mode item to
[Manual].
DRAM Fixed Frequency Mode [300]
Allows you to set a fixed DRAM frequency. Use the <+> or <-> keys to adjust the value.
The values range from 300kHz to 500kHz with a 10kHz interval.
DRAM Power Phase Control [Auto]
Allows you to set the power phase control of the DRAM.
[Auto]
Allows you to set the Auto mode.
[Optimized] Allows you to set the ASUS optimized phase tuning profile.
[Extreme] Allows you to set the full phase mode.