Asus MAXIMUS VI EXTREME - Manual (Page 85)

ASUS MAXIMUS VI EXTREME 2-21
Chapter 2
2.4 OC Panel
The OC Panel is a device that allows you to perform overclocking without the need to go to
the BIOS settings or use software utilities. You can setup the OC Panel in an available 5.25-
inch drive bay on your computer chassis (Normal Mode) or as an external handheld console
on an “open-air” OC test bench (Extreme Mode.)
These modes are further explained in the succeeding subsections.
• Ensure that your system has adequate cooling designed for overclocking before using
the OC Panel.
• When updating the OC Panel firmware, you have to disable the USB XHCI function in
BIOS. To do this, click
Advanced > USB Configuration > Intel xHCI Mode then set
Intel xHCI Mode to [Disabled].
2.4.1 OC Panel Overview
ON
OFF
ON
OFF
OC
Start
Clear
Reset
OK
OC
Start
Clear
Reset
OK
Subzero Sense
connector
ON
OFF
ON
OFF
Start
Clear
Reset
OK
OC
Normal/Extreme
Mode Switch
CPU Level Up
Start Button
Value up Button
Left Arrow button
LCM Power Button
FanSpeed Control
button
OK button
Reset button
Value Down button
Right Arrow button
Clear button
Fan connectors 1,2
VGA hotwire
connectors
Fan connectors 3,4
VGA hotwire Pause/Slow Mode
OC Panel cover