Asus TS100-E5/PI4 - Manual (Page 95)

ASUS TS100-E5/PI4 5-5
5.2.1 Creating a RAID set
To create a RAID set:
1. From the utility menu bar, select Create on the top.
Marvell BIOS Setup (c) 2006 Marvell Technology, Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
Adapter 1
Arrays Information:
No array is defined!
Disks Information:
ID Port Disk Name Size Speed Status
0 0 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE
4 1 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE
8 2 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE
12 3 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE
[ Adapter] [ Create] [ Delete]
2. Press . The screen shows the disks you can add to make up
the RAID set. Use the arrow key to select a disk and press or
to include this disk in the array.
Marvell BIOS Setup (c) 2006 Marvell Technology, Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
Select free disks to create
ID Port Disk Name Size Speed Status
0 0 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE
4 1 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE
8 2 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE
12 3 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE
NEXT
[ Adapter] [ Create] [ Delete]
0 0 SATA: Hitachi HDS721010KLA330 1TB SATA II FREE
3. After you have selected the desired disks, select NEXT to create array.