Asus TS100-E5/PI4 - Manual (Page 78)

4-22 Chapter 4: BIOS setup
4.4.7 Onboard Devices Configuration
The Onboard Devices Configuration menu allows you to change the onboard
devices settings. Select an item then press to display the sub-menu.
Configure Win83627DHG-A Super IO Chipset
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
PCIE LAN-8056A [Enabled]
LAN8056A Boot ROM [Disabled]
PCIE LAN-8056B [Enabled]
LAN8056B Boot ROM [Disabled]
PCIE LAN-8056C [Enabled]
LAN8056C Boot ROM [Disabled]
PCIE LAN-8056D [Enabled]
LAN8056D Boot ROM [Disabled]
PCIE Marvell 6145 [Enabled]
Allows BIOS to Select
Serial Port1 Base
Addresses.
Serial Port1 Address [3F8/IRQ4]
Allows you to select the Serial Port1 base address.
Configuration options: [Disabled] [3F8/IRQ4] [3E8/IRQ4]
Serial Port2 Address [2F8/IRQ3]
Allows you to select the Serial Port2 base address.
Configuration options: [Disabled] [2F8/IRQ3] [2E8/IRQ3]
PCIE LAN-8056A / B / C / D [Enabled]
Allows you to hide or active PCIE LAN-8056A, B, C, or D.
Configuration options: [Disabled] [Enabled]
LAN8056A / B / C / D Boot ROM [Disabled]
Allows you to enable or disalbe the Boot ROM of LAN8056A, B, C or D.
Configuration options: [Disabled] [Enabled]
PCIE Marvell 6145 [Enabled]
Allows you to enable or disable the Marvell 6145 SATA controller.
Configuration options: [Disabled] [Enabled]
BIOS SETUP UTILITY
Advanced
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.