Asus TS100-E5/PI4 - Manual (Page 9)

ix
About this guide
Audience
This user guide is intended for system integrators and experienced users with at
least basic knowledge of configuring a server.
Contents
This guide contains the following parts:
1. Chapter 1: Product Introduction
This chapter describes the general features of the server, including sections
on front panel and rear panel specifications.
2. Chapter 2: Hardware setup
This chapter lists the hardware setup procedures that you have to perform
when installing or removing system components.
3. Chapter 3: Motherboard information
This chapter gives information about the motherboard that comes with the
server. This chapter includes the motherboard layout, jumper settings, and
connector locations.
4. Chapter 4: BIOS information
This chapter tells how to change system settings through the BIOS Setup
menus and describes the BIOS parameters.
5. Chapter 5: RAID configuration
This chapter provides information on how to configure your hard disk drives
as RAID sets.
6. Chapter 6: Driver installation
This chapter provides information on how to create a RAID set and how to
install the drivers for system components. This chapter also describes the
software applications that the barebone server supports.
7. Appendix: Reference information
This section provides information about the power supply unit and a
troubleshooting guide for solving common problems when using the
barebone server.