Asus TS100-E5/PI4 - Manual (Page 31)

2-13 ASUS TS100-E5/PI4
6. Attach the other side of the HDD
screw holes to the cage pin caps,
as shown in the right figure.
7. Carefully insert the HDD holder
and push it all the way to the depth
of the bay until the cage handles fix
to the HDD bay.
8. From the other side of the chassis,
connect one end of the 7-pin SATA
cable to the SATA connector at
the end of the drive. Connect the
other end of the cable to a SATA
connector on the motherboard.
9. Connect a 15-pin SATA power plug
to the SATA power connector at the
back of the drive.
Use either the 15-pin SATA power connector OR the legacy 4-pin power
connector. DO NOT use both to prevent damage to components and to keep
the system from becoming unstable.