Billet Specialties Premium Tru Trac Serpentine System - Small Block Chrysler, LA__Magnum - Manual (Page 8)

www.billetspecialties.com www.billetspecialties.com
15
FOR kITS WITHOUT POWER STEERING – CONTINUE TO FIGURE 11
Figure 10: Install Power Steering Pump With Pulley
Apply anti-seize to the threads of the two 5/16-18 x 2-3/4” socket head
cap screws.
Place power steering pump with pulley on bracket and align.
Thread the two 5/16-18 x 2-3/4” cap screws with 5/16” lock washers
through the power steering pump mount bosses and into the power
steering bracket, tighten firmly 26ft/lbs.
Figure 9: Install Alternator
Apply anti-seize to the 8mm-1.25 x 25mm ARP 12-point cap screw and the
10mm-1.25 x 70mm ARP 12-point cap screw.
A] Place alternator between bridge bracket and alternator bracket, align
alternator bosses with the bridge bracket. Thread the 10mm ARP 12-point
cap screw through the bottom bridge bracket hole and alternator into
the alternator bracket, finger tighten.
B] Thread the 8mm ARP 12-point cap screw through the bridge bracket
and into the top alternator boss.
Tighten all fasteners firmly at this time: All ARP 12-point fasteners and flat
head bridge bracket screws.
A
B