Billet Specialties Window Cranks - Ball Milled Black Anodized - Manual

INSTRUCTIONS
1. Position regulator adapter n shaft and tighten 10-32 set
screws using a 3/32” Allen wrench. Adapter should be
indexed at this time for handle positioning.
2. Install regulator adapter cover.
3. Index handle at one of the four positions and install the
1/4-28 button head cap screw with cup washer. Tighten
using a 5/32” Allen wrench.
4. Position handle cap with O-ring to handle. Press handle
cap into handle to hide fasteners.
5. Cup Washer
6. 1/4-28 Button Screw
7. Handle Cap O-Ring
8. Handle Cap
1. Regulator Adapter Set-Screws
2. Regulator Adapter
3. Regulator Adapter Cover
4. Door/Window Handle 1
2
3
4
5
6
7
8