beautypg.com

Usb command description for triggering, Hr2000+ and usb2000+ set trigger mode – Ocean Optics External Triggering Options Instructions for Spectrometers with Firmware Version 3.0 and Above User Manual

Page 15

background image

External Triggering Instructions for FW 3.0 and Above

200-00000-001-01-201401

15

USB Command Description for Triggering

The USB command Set Trigger Mode sets the spectrometer trigger to one of the trigger mode states as
shown below.

HR2000+ and USB2000+ Set Trigger Mode

Data Value = 0

 Normal (Free running) Mode

Data Value = 1

 Software Trigger Mode

Data Value = 2

 External Hardware Level Trigger Mode

Data Value = 3

 External Synchronization Trigger Mode

Data Value = 4

 External Hardware Edge Trigger Mode

See also other documents in the category Ocean Optics Equipment: