Littelfuse SRV05 Series - Manual (Page 4)

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 11/25/13
TVS Diode Arrays
(SPA ® Diodes)
Lightning Surge Protection - SRV05 Series
Embossed Carrier Tape & Reel Specification — SOT23-6
8mm TAPE AND REEL
GENERAL INFORMATION
1. 3000 PIECES PER REEL.
2. ORDER IN MULTIPLES OF FULL REELS ONLY.
3. MEETS EIA-481 REVISION "A" SPECIFICATIONS.
2.0mm
4.0mm
CL
1.75mm
1.5mm
DIA. HOLE
8mm
4.0mm
8.4mm
180mm
14.4mm
13mm
60mm
ACCESS HOLE
COVER TAPE
USER DIRECTION OF FEED PIN 1
SOT-23 (8mm POCKET PITCH)
Package Dimensions — SOT23-6
Package SOT23-6
Pins 6
JEDEC MO-178
Millimeters Inches
Notes
Min Max Min Max
A 0.900 1.450 0.035 0.057 -
A1 0.000 0.150 0.000 0.006 -
A2 0.900 1.300 0.035 0.051 -
b 0.350 0.500 0.0138 0.0196 -
C 0.080 0.220 0.0031 0.009 -
D 2.800 3.000 0.11 0.118 3
E 2.600 3.000 0.102 0.118 -
E1 1.500 1.750 0.06 0.069 3
e 0.95 Ref 0.0374 ref -
e1 1.9 Ref 0.0748 Ref -
L 0.100 0.600 0.004 0.023 4,5
N 6 6 6
a 0º 10º 0º 10º -
M 2.590 0.102 -
O 0.690 .027 TYP -
P 0.990 .039 TYP -
R 0.950 0.038 -
O
P
R
M
Recommended Solder Pad Layout
Notes:
1. Dimensioning and tolerances per ANSI 14.5M-1982.
2. Package conforms to EIAJ SC-74 (1992).
3. Dimensions D and E1 are exclusive of mold flash, protrusions, or gate burrs.
4. Footlenth L measured at reference to seating plane.
5. “L” is the length of flat foot surface for soldering to substrate.
6. “N” is the number of terminal positions.
7. Controling dimension: MILLIMETER. Converted inch dimensions are not necessarily exact.