Littelfuse Fixed Voltage TwinSLIC Series DO-214 - Manual

SIDACtor ® Protection Thyristors
93
Revised: February 22, 2011
© 2011 Littelfuse, Inc.
Specifications are subject to change without notice.
Please refer to www.littelfuse.com for current information.
SLIC Protection
Fixed Voltage TwinSLIC™ Series - Modified DO-214
Electrical Characteristics
Fixed Voltage Series Modified DO-214 are uni-
directional SIDACtor
® devices designed to protect
SLICs (Subscriber Line Interface Circuit) from damaging
overvoltage transients.
The series provides single port protection using fixed
voltage switching devices for negative surges. All
positive surges are routed through internal diodes to a
ground reference.
Description
Features and Benefits
t Low voltage overshoot
t Low on-state voltage
t Does not degrade with use
t Fails short circuit when
surged in excess of ratings
t Integrated diodes for
positive voltage surges
t Single-port protection
Agency Approvals
Agency Agency File Number
E133083
Schematic Symbol
Pinout Designation
Part Number Marking
V
DRM
@l
DRM
=5μA
V
S
@100V/μs
I
H
I
S
I
T
V
T
@I
T
=2.2 Amps
V
F
Capacitance
V min V max
mA min mA max A max V max V max
Pin 1-2, 3-2
P0641CA2LRP P62A 58 77 120 800 2.2 4 5
See
Capacitance
Values table
P0721CA2LRP P72A 65 88 120 800 2.2 4 5
P0901CA2LRP P92A 75 98 120 800 2.2 4 5
P1101CA2LRP P02A 95 130 120 800 2.2 4 5
P1301CA2LRP P131A 120 160 120 800 2.2 4 5
P1701CA2LRP P17A 160 200 120 800 2.2 4 5
Pin 3
Pin 1
Pin 2
Applicable Global Standards
t TIA-968-A
t TIA-968-B
t ITU K.20/21 Enhanced
Level
t ITU K.20/21 Basic Level
t GR 1089 Inter-building*
t GR 1089 Intra-building*
t IEC 61000-4-5
t YD/T 1082
t YD/T 993
t YD/T 950
* Series resistance required
Notes:
- Absolute maximum ratings measured at T
A
= 25ºC (unless otherwise noted).
- Devices are uni-directional
1
3
2
(T)
(G)
(R)