Littelfuse PGR-6130 Series User Manual
Pgr-6130 series, Protection relays & controls, Electronic overload relay description
Protection Relays & Controls
© 2013 Littelfuse Protection Relays & Controls
Littelfuse.com/pgr-6130
PGR-6130 SeRieS
Electronic Overload Relay
Description
The PGR-6130 Electronic Overload Relay provides protection
for small three-phase motors up to 1,000 Vac. No current
transformers are required for currents up to 91 A. The
protective functions include overload, overtemperature, phase
unbalance, phase loss, and phase sequence. The PGR-6130
Electronic Overload Relay offers dependable protection and can
be used on pumps, conveyor belts, ventilation fans and other
small-motor applications that require standard protection.
Specifications
Protective Functions
Overload (49, 51)
(IEEE Device Numbers)
Phase sequence (46)
Overcurrent (51)
PTC overtemperature (49)
Unbalance (current) (46)
Phase loss (current) (46)
Input Voltage
See ordering information
Frequency
50, 60 Hz
Dimensions
H 83 mm (3.3”); W 78 mm (3.1”); D 99 mm (3.9”)
Test Button
Standard feature
Reset Button
Standard feature
Output Contacts
Isolated Form A and Form B
Approvals
UL Listed (E343314), CE (European Union)
Warranty
5 years
Mounting DIN
ORdeRinG numbeR
COnTROL POWeR FuLL-LOad CuRRenT
PGR-6131-24
24 Vdc
4-16.7 A
PGR-6131-120
120 Vac
4-16.7 A
PGR-6131-240
240 Vac
4-16.7 A
PGR-6132-24
24 Vdc
15-40.5 A
PGR-6132-120
120 Vac
15-40.5 A
PGR-6132-240
240 Vac
15-40.5 A
PGR-6133-24
24 Vdc
40-91 A
PGR-6133-120
120 Vac
40-91 A
PGR-6133-240
240 Vac
40-91 A
motor Protection–electronic Overload (PGR 6000 Family)
Ordering Information
NOTE: External CTs can be used for full-load currents >91 A.
FeaTuReS
beneFiTS
No CTs required
No current transformers required for currents up to
91 A, simplifies installation and reduces cost
Adjustable
trip settings
Adjustable overload trip class setting from 5 to 35
to match motor characteristics
Output contacts
Form A and Form B ground-fault output contacts for
operation of separate annunciation and trip circuits
Remote indication
Allows remote cause-of-trip indication and reset
Overload
Extends motor life and prevents insulation failures
and fires
Phase loss/Phase
sequence
Detects unhealthy supply conditions
Unbalance (current)
Prevents overheating due to unbalanced phases
PTC overtemperature
Detect high ambient or blocked ventilation and
single phasing; prevents shaft/pump damage
Features & Benefits
PGB-6130 Remote Indication
and Reset Assembly
Optional remote indication of overcurrent,
phase unbalance, phase loss, phase sequence
and overtemperature. Remote reset included.
Accessories
A
aCCeSSORieS
RequiRemenT
PGB-6130
Optional
PGR-6130
SERIES
(Electronic Overload Relay)
PGB-6130
(Remote Indication
and Reset Assembly)
PTC
M
L2
L1
Simplified Circuit Diagram
A
Rev: 4-A-050213
Based on Manual Rev 0