Littelfuse SP1004 Series - Manual

© 2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/10/13
TVS Diode Arrays
(SPA ® Diodes)
General Purpose ESD Protection - SP1004 Series
Description
Applications
Back-to-back zener diodes fabricated in a proprietary silicon
avalanche technology protect each I/O pin to provide a
high level of protection for electronic equipment that may
experience destructive electrostatic discharges (ESD).
These robust diodes can safely absorb repetitive ESD
strikes at the maximum level specified in the IEC 61000-4-
2 international standard (Level 4, ±8kV contact discharge)
without performance degradation. Their very low loading
capacitance also makes them ideal for protecting high-
speed signal pins.
Features
• ESD, IEC61000-4-2, ±8kV
contact, ±15kV air
• Capable of withstanding
>1,000 ±8kV ESD strikes
• Lightning, IEC61000-4-5,
2A (t
p
=8/20µs)
• Low capacitance of 5pF
(TYP) per I/O
• Low leakage current of
1µA (MAX) at 5V
• Small SOT953 package
• MP3-PMPs
• DVD players
• Desktops
• Mobile phones • Digital cameras
• Set top boxes
• Notebooks
Pinout
I/O 1
I/O 2
4 O /I 3 O /I
I/O 5
SOT953
Functional Block Diagram
5 4
1 2 3
Life Support Note:
Not Intended for Use in Life Support or Life Saving Applications
The products shown herein are not designed for use in life sustaining or life saving
applications unless otherwise expressly indicated.
Notes:
1 Any of the 5 I/O pins can be tied to GND to provide 4 channels of bidirectional protection
RoHS Pb GREEN
Application Example
Signal
Ground
Back panel (STB, TV)
SP1004-04VTG (SOT953)
Shield
Ground
Audio codec
Left - In
Right - In
Left - Out
Right - Out
RCA jacks
SP1004 Series 5pF 8kV Bidirectional TVS Array
Additional Information
Datasheet Samples Resources