Littelfuse SMCJ-HRA Series - Manual

Transient Voltage Suppression Diodes
34
TVS Diode Arrays
(SPA ™ Family of Products)
©2013 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 10/24/13
Surface Mount – 1500W > SMCJ-HRA series
SMCJ-HRA Series
SMCJ-HRA devices are ideal for the high reliability
protection of I/O Interfaces, V
CC
bus and other vulnerable
circuits used in Telecom, Computer, Industrial and
Consumer electronic applications.
Applications
• High reliability devices
with fabrication and
assembly lots traceability
• Enhanced reliability
screening options are
available in reference to
MIL-PRF-19500. Refer to
screen process table for
more detail on screening
options
• For surface mounted
applications to optimize
board space
• Low profile package
• Built-in strain relief
•
V
BR
@T
J
= V
BR
@25°C x (1+ αT
x (T
J
- 25))
( αT:Temperature Coefficient)
• Glass passivated chip
junction
• 1500W peak pulse power
capability at 10/1000μs
waveform, repetition rate
(duty cycles):0.01%
• Fast response time:
typically less than 1.0ps
from 0V to BV min
• Excellent clamping
capability
• Low incremental surge
resistance
• Typical I
R
less than 1µA
above 12V
• High Temperature
soldering guaranteed:
260°C/40 seconds at
terminals
• Plastic package has
Underwriters laboratory
flammability 94V-O
• Meet MSL level1, per
J-STD-020, LF maximun
peak of 260
° C
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
Features
The SMCJ-HRA High Reliability series is designed
specifically to protect sensitive electronic equipment from
voltage transients induced by lightning and other transient
voltage events. These are available with a variety of up-
screening options for enhanced reliability.
Description
Parameter Symbol Value Unit
Peak Pulse Power Dissipation at
T
A
=25ºC by 10/1000µs waveform
(Fig.1)(Note 1), (Note 2)
P
PPM
1500 W
Power Dissipation on infinite heat
sink at T
A
=50 O C
P
M(AV)
6.5 W
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
I
FSM
200 A
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
only (Note 4)
V
F
3.5/5.0 V
Operating Junction and Storage
Temperature Range
T
J
, T
STG
-55 to 150 °C
Typical Thermal Resistance Junction
to Lead
R
uJL
15 °C/W
Typical Thermal Resistance Junction
to Ambient
R
uJA
75 °C/W
Notes:
1. Non-repetitive current pulse , per Fig. 3 and derated above T
A
= 25 O C per Fig. 2.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
device only, duty cycle=4 per minute maximum.
4. V
F
<3.5V for V
BR
_ _ < 200V and V
F
<5.0V for V
BR
__ > 201V.
Maximum Ratings and Thermal Characteristics
(T
A
=25 O C unless otherwise noted)
Agency Approvals
AGENCY AGENCY FILE NUMBER
E230531
1
Functional Diagram
Bi-directional
Uni-directional
Cathode Anode
RoHS
SMCJ-HRA Series
Bi-directional
Uni-directional