StreetGlow LED Strobe Lights User Manual
Led strobe light
LED STROBE LIGHT
All StreetGlow products are covered by a
comprehensive warranty.
StreetGlow products are warranted against defective
materials and workmanship for one year from date of purchase.
Any product that should fail for either defective materials or
workmanship will be repaired or replaced, at StreetGlow’s option, as
the sole remedy of the buyer. Proof of purchase is required. All
warranty claims are to be handled by selling agents. Accident,
abuse, neglect, modifications, broken glass, labor, transportation,
improper installation and the use of products other than for their
intended purposes are not covered. NEITHER SELLER NOR
THE MANUFACTURER SHALL BE LIABLE FOR ANY
INJURY, LOSS OR DAMAGE, DIRECT, INCIDENTAL OR
CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
LOST PROFITS, LOST SALES, INJURY TO PERSON OR
PROPERTY OR ANY OTHER INCIDENTAL OR
CONSEQUENTIAL LOSS), ARISING OUT OF THE USE OR
THE INABILITY TO USE THE PRODUCT AND THE USER
AGREES THAT NO OTHER REMEDY SHALL BE AVAILABLE
TO IT. Before using, the user shall determine the suitability of
the product for the intended use, and user assumes all risk and
liability whatsoever in connection therewith. Some states and
countries do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal
rights and you may also have other rights, which vary from state
to state and from country to country.
DISCLAIMER: THE FOREGOING WARRANTY IS AN
EXCLUSIVE WARRANTY IN LIEU OF ANY OTHER
EXPRESS WARRANTIES. ANY IMPLIED WARRANTIES
(INCLUDING, BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE) TO THE EXTENT THAT IT
COULD APPLY TO ANY OF THE PRODUCTS
MANUFACTURED BY THE COMPANY SHALL BE LIMITED
IN DURATION TO THE PERIODS OF THE EXPRESS
WARRANTY GIVEN ABOVE.
Design and specifications are subject to change without notice.
The retailer shall not be held responsible for any damages that
occur as a result of defective products. StreetGlow products are
recommended for show and off-road use only. Laws concerning
the use of aftermarket lighting products may vary from state to
state. For more information, check with your local authority.
CONTENTS:
1- LED Strobe Light
All necessary mounting hardware
INSTRUCTIONS:
1) Mount LED Strobe in desired location using supplied
mounting hardware.
2) Connect BLACK wire to vehicle’s chassis ground.
3) Connect RED wire to a positive (+) 12v source for
Strobe control (switch not supplied)
4) Connect WHITE wire to a positive (+) 12v source for
LED control (switch not supplied)
5) Enjoy!
WARNING!
Strobe Light may affect people
with photosensitive epilepsy.
WHITE = 12v (+) for LED control
RED = 12v (+) for Strobe control
BLACK = chassis ground