beautypg.com

StreetGlow Neon Motorcycle Plate Frame User Manual

Motorcycle neon license plate instructions, Auto-neon, Accessories

background image

The Original

Auto-Neon

®

Accessories

INSTALLATION

INSTRUCTIONS

1- Disconnect battery before wiring.
2- Do not over tighten or frame will crack.
3- Mount license plate on front of neon
frame and bolt in place using enclosed rub-
ber washers and lock nuts. Use rubber
washers in front of license plate and in back
of neon frame before securing lock nut.
4- Splice and connect red wire (+) to brake
light or alternative light source depending
on which activation you prefer. Connect
black wire (-) to ground.

5- Reconnect the battery.

Should you desire a 4 hole mount, you may

drill through the neon frame using your

icense plate as a template.

MOTORCYCLE NEON
LICENSE PLATE
INSTRUCTIONS

MOTORCYCLE NEON

LICENSE PLATE

INSTRUCTIONS