Driverack, Application guide, 1 stereo 3-way – dbx DriveRack PA+ User Manual
Page 28
Section 6 - Application Guide
This Application guide section is provided to offer suggested installation applications for the
DriveRack® PA+. Note that the 25 included application presets represent the extensive
flexibility of the DriveRack units. These applications can be used as sample reference guide
templates for designing countless audio applications.
6.1 Stereo 3-Way
Hardware
Connect the outputs from the mixer to the inputs of the DriveRack PA+.
1.
Connect the outputs of the DriveRack PA+ to the selected speaker amplifier.
2.
Make sure that the mixer and power amps are turned off prior to powering up the
3.
DriveRack PA+.
Front Panel Editing
From Preset mode, select factory preset #26 (Stereo 3-Way) as a template, or use the
1.
Wizard to set up the specific preset.
Once the preset has been chosen, press the Data Wheel to load the preset.
2.
Left
Right
Left Mid
Right Mid
Left Sub
Right Sub
Left High
Right High
Left Low
Right Low
1202
Left Mid
Left High
Right Mid
Right High
Section 6
Application Guide
24
DriveRack
®
PA+