Vonnic VVRHD1620M 16CH HD-SDI 1080P High Resolution DVR (Hard Drive Not Included) - Manual (Page 61)

Page
61
10-5. SYSTEM
 DVR-ID – Allows the user to change the DVR ID
 DATE FORMAT – Allows the user to change the DATE FORMAT display from the
following; YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD, MM-DD-YYYY,
DD-MM-YYYY.
 NTP – OFF, ON (Allows the user to set NTP OFF or ON)
o PRIMARY SNTP SERVER – PRIMARY SNTP (Simple Network Time Protocol)
SERVER
o SECONDARY SNTP SERVER – SECONDARY SNTP (Simple Network Time Protocol)
SERVER
o TIME ZONE – Allows the user to set the TIME ZONE
o CONNECTION MODE – INTERVAL, TIME, ONCE (Allows user to select the SNTP
CONNECTION MODE)
 CONNECTION PERIOD – Allows the user to set the SNTP Synchronize
CONNECTION PERIOD when setting the CONNECTION MODE to
INTERVAL or TIME
 SEND EMAIL – OFF, ON (Allows the user to set SEND EMAIL OFF or ON)
o TRANSMISSION MODE – IMAGE (Transmits an IMAGE of the triggered ALARM-
OUT CHANNEL)
o IP NOTIFICATION – OFF, ON (Allows the user to set IP NOFICIATION ON or OFF)
o EVENT ALARM – OFF, ON (Allows the user to set EVENT ALARM ON or OFF)
o MAIL BY S.M.A.R.T – OFF, ON (Allows the user to set S.M.A.R.T NOTIFICATION
ON or OFF)