Vonnic VVRHD1620M 16CH HD-SDI 1080P High Resolution DVR (Hard Drive Not Included) - Manual (Page 28)

Page
28
7-8. Setting the Remote Controller ID
When more than one HD DVR is installed in the same location, it is possible to use one remote
controller to control multiple DVRs – up to 99 DVRs. To control multiple DVRs, the remote
controller ID and the DVR remote control ID must match.
To change the remote controller ID:
1. Press ID.
2. Input the ID number.
To change the DVR remote controller ID:
1. Enter SETUP.
2. Select DEVICE.
3. Highlight REMOTE CONTROL ID and use the arrow keys to change the ID.
7-9. First Time Booting
During the first start booting, the following message will be displayed.
Select the preferred LANGUAGE and SET DATE & TIME to complete the INITIALIZATION.
7-10. Basic Mouse Functions

LEFT CLICK – SELECT Function or Change Screen Mode

RIGHT CLICK – Open Sub Menu or Cancel