beautypg.com

Operating tests – tmu two-speed motor, 5 operating tests – tmu two-speed motor – R&M Materials Handling ELECTRIC CHAIN HOISTS LoadMate Chain Hoist TMU Motorized Trolley User Manual

Page 13

background image

LM

TMU I&M MANUAL/EN/06.15.2009


13/38

This document and the information contained herein, is the exclusive property of R&M Materials Handling, Inc., and represents a non-public, confidential and proprietary trade secret
that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of R&M Materials Handling, Inc.
Copyright © (2009) R&M Materials Handling, Inc. All rights reserved.

1.5 Operating Tests – TMU Two-speed Motor

m

CAUTION: Always be ready to press the emergency stop button.

y

Check that the electrical connections and mechanical assemblies are all correct.

y

Check that the operating parameters are as required.

y

Check for loose electrical connections.

y

Close the control enclosure cover.

y

Turn on the power supply.

y

Check that the movements of the trolley are free from obstruction and do not cause any danger.

y

Verify supply voltage matches the motor nameplate voltage.

y

If the trolley moves to the wrong direction with respect to the push button pressed, interchange L1 and L2

leads on the contactor in the trolley control panel.

y

Operate at minimum speed for 5 to 10 seconds. Accelerate up to maximum speed and hold it for 5 to 10

seconds.

y

Carry out the same operation in the opposite direction, first at minimum speed and then at maximum

speed.

y

Check the operations of the left and right trolley travel limit switches. Limit switch is an optional

component.