Sena Bluetooth SMH10 v5.0 User's Guide - Manual (Page 36)

SMH10
37
English
4. Now two SMH10 headsets (A & C) and two non-Sena Bluetooth
headsets (B & D) are connected with the four-way Universal Intercom.
(B) (D)
(A) (C)
You may disconnect a four-way Universal Intercom using the same
way as you do in a normal four-way intercom. Please refer to section,
15.2 “End Four-way Intercom”.
17.4.2 Four-way Universal Intercom Case 2
Three SMH10 headsets (A, C and D) and one non-Sena Bluetooth
headset (B). The procedure is the same as the case 1 described in
section 17.4.1.
(B) (D)
(A) (C)
You can have a three-way conference phone call by adding an
intercom friend to the mobile phone conversation. While having a
mobile phone call, make an intercom call to one of the intercom
friends by tapping the Jog Dial to form a three-way conference call
with the person on the mobile phone line. To disconnect the intercom
first and go back to your private mobile phone call, terminate the
intercom by tapping the Jog Dial. To end the mobile phone call
first and maintain the intercom conversation, press the Jog Dial for
2 seconds, or tap the phone button, or wait for the person on the
mobile phone line to end the call.
Start Tap Jog Dial while having a mobile phone call
End intercom first Tap Jog Dial
End phone call first
Press Jog Dial for 2”
or
Tap Phone Button
or
Wait for the called person to end the call
Start & End Three-way Conference Phone Call
18. THREE-WAY CONFERENCE PHONE CALL
WITH INTERCOM PARTICIPANT