Sena Bluetooth SMH10 v5.0 User's Guide - Manual (Page 32)

SMH10
33
English
You can start sharing music with an intercom friend using Bluetooth
stereo music during a two-way intercom conversation. When you
terminate music sharing, you can go back to the intercom conversation.
To start or terminate sharing music, press and hold the Jog Dial for
1 second during an intercom conversation until you hear a double
beep and you and your intercom friend will listen to or terminate
sharing music. To track forward or track back, rotate while pressing
down the Jog Dial clockwise or counter clockwise.
Note:
1. Both you and your intercom friend can remotely control music playback
during music sharing such as track forward and track back.
2. When you have an incoming call, make a phone call, or hear the turn-
by-turn voice instruction of GPS during music sharing, the function will
be paused.
3. In order to share music, make sure that you update both headsets with
the firmware that has the music sharing feature, and enable the EDR
setting in the Sena Device Manager.
16. MUSIC SHARING 17. UNIVERSAL INTERCOM
You can have an intercom conversation with non-Sena Bluetooth
headsets using the Universal Intercom function. Non-Sena Bluetooth
headsets can be connected to the Sena Bluetooth headset if they
support the Bluetooth Hands-Free Profile (HFP). The working
distance may differ depending on the performance of Bluetooth
headset that it is connected to. In general, it is shorter than normal
intercom distance since it uses the Bluetooth Hands-Free Profile.
17.1 Universal Intercom Pairing
The SMH10 can be paired with non-Sena Bluetooth headsets for
Bluetooth intercom conversation. You can pair the SMH10 with only
one non-Sena Bluetooth headset; if you pair with a different non-
Sena Bluetooth headset, the previous pairing list will be removed.
1. Turn on the SMH10 and a non-Sena Bluetooth headset which you
want to pair with.
2. Press and hold the Jog Dial on the SMH10 for 8 seconds until
the blue LED flashes rapidly. You will hear a voice prompt saying
“Universal intercom pairing”.