Sena Bluetooth SMH10 v5.0 User's Guide - Manual (Page 33)

SMH10
34
3. Perform the operation required for handsfree pairing on the non-
Sena Bluetooth headset (refer to the users’ manual of the headsets
you want to use). The SMH10 will automatically perform pairing
with non-Sena Bluetooth headsets in pairing mode.
17.2 Two-way Universal Intercom
You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. You may single tap the Jog
Dial to begin an intercom conversation with the first intercom friend,
double tap with the second intercom friend, and triple tap with the
third intercom friend.
Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, activating the voice dialing or using the redialing
operation. You may also disconnect the existing connection by ending
a call operation function (refer to the users’ manual of the headsets
for voice dialing, redialing, and ending a call).
17.3 Three-way Universal Intercom
You may make a three-way Universal Intercom connection with
two SMH10s and one non-Sena Bluetooth headset. If the intercom
connection is made, all headsets connected cannot use the mobile
phone call function since the connection between the headset and
the phone is disconnected temporarily. If you disconnect the intercom
call, the mobile phone connection is made again automatically so that
you can use a mobile phone call function. During the intercom call,
you cannot pick up the incoming phone call since it is disconnected,
however, you can pick it up if you disconnect the intercom call.
1. You (A) need to be paired with non-Sena Bluetooth headset (B)
and another SMH10 headset (C) for the three-way conference
intercom.
(A)
(B) (C)
Pairing
Pairing