Sena Bluetooth SMH10 v5.0 User's Guide - Manual (Page 27)

SMH10
28
a. To answer the phone call and stop the intercom conversation,
tap the Jog Dial or the Phone Button. When you hang up the
phone call, the intercom will automatically be recovered.
b. To reject the phone call and stay on the intercom conversation,
press the Jog Dial for 2 seconds until you hear a beep.
Unlike other motorcycle Bluetooth headsets, this prevents a
user from being dropped out of an intercom conversation by an
incoming mobile call.
2. When you have an incoming intercom call during a mobile phone
call, you will hear 4 high tone beeps, alerting you that there is an
incoming intercom call. You will also hear a voice prompt saying
“Intercom requested”. In this case, the intercom call does not
override the mobile phone call because intercom has lower priority
than mobile call. You have to hang up the mobile phone call to
make or receive an intercom call.
13.3 Intercom and GPS
If you pair a Bluetooth GPS to the SMH10 as described in 6.4 of
this user's guide, you can hear the turn-by-turn voice instruction
of the GPS while having an intercom conversation. The GPS voice
instruction interrupts intercom conversation, but it is automatically
reestablished after the GPS voice instruction ends.
2. To terminate an intercom conversation, single tap the Jog Dial. Any
intercom connection with any intercom friend will be terminated by
a single tapping. A double or triple tapping will do nothing in this
case.
End Two-way Intercom Conversation
Terminate
1st intercom friend 2nd intercom friend 3rd intercom friend
Start intercom Single tap Double tap Triple tap
End intercom Single tap
13.2 Intercom and Mobile Phone Call
1. When you have an incoming mobile phone call during an intercom
conversation, you will hear a ring tone. You can choose whether to 1)
answer the mobile phone call and stop the intercom conversation,
or 2) reject the phone call and stay on the intercom conversation.