Sena Bluetooth SMH10 v5.0 User's Guide - Manual (Page 17)

SMH10
18
8.1 Pairing with Other SMH10 Headsets for Intercom
Conversation
The SMH10 can be paired with up to three other headsets for
Bluetooth intercom conversation.
1. Turn on the two SMH10 headsets (A and B) that you would like to
pair with each other.
2. Press and hold the Jog Dial of the headset A and B for 5 seconds
until red LEDs of the both units start to flash rapidly. You will hear a
voice prompt saying “Intercom pairing”.
3. Simply tap the Jog Dial of any one of the two headsets A or B (It
doesn’t matter that you choose A or B.) and wait until the LEDs of
both headsets turn to blue and intercom connection is automatically
established. The two SMH10 headsets A and B are paired with
each other for intercom conversation. If the pairing process is not
completed within one minute, the SMH10 will return to stand-by
mode.
8. INTERCOM PAIRING
A
B D
C
Pairing A & B
4. You can make other pairings between the headset A and C, and
between the headset A and D by following the same procedure as
above.
A A
B B D D
C C
Pairing A & C Pairing A & D