B&B Electronics 7506GX2-SX - Manual - Manual (Page 44)

(Revised 2010-7-30) Page 44 of 158
DHCP – Relay & Local IP – Setup, Continued…
Relay Status
Indicates whether the DHCP relay agent is active.
Remote ID
The unique identifier that designates the relay agent switch.
Server # IP
The configured IP address of the DHCP servers.
Port No
The actual port number.
Port Name
The descriptive name of the port.
Relay Status
The selection to designate whether the port will perform relay agent functionality. The choices are:
Disabled The port will function without relay agent processing.
Enabled The port will relay DHCP client-originated broadcast packets to the DHCP servers.
Assign Local IP The port will not relay DHCP client-originated broadcast packets. Instead the relay agent
will offer the port‘s locally assigned IP address to the client.
Other Data
When the Relay Status is set to Enabled, the Circuit ID for the port can be specified. When the Relay Status is set to
Assign Local IP, the IP address for the port can be specified.