Administration – system, continued – B&B Electronics 7506GX2-SX - Manual User Manual

Page 31

Text mode
Original mode

(Revised 2010-7-30)

Page 31 of 158

Administration – System, Continued…

If the IP Configuration mode is set to DHCP and the Fallback IP address is changed from the default IP
address, then the switch will use the Fallback addresses if the IP configuration isn‘t received from a DHCP
server in 2 minutes after initial boot. If Fallback address is used, DHCP Client will stop sending requests. If
the IP Configuration is received from a DHCP server, it will never fallback, even if the lease is lost.