B&B Electronics 7506GX2-SX - Manual - Manual (Page 30)

(Revised 2010-7-30) Page 30 of 158
Administration – System, Continued…
By selecting the Modify button, you will be able to change the switch‘s IP Configuration, Client ID, IP
Address, Subnet Mask, Gateway, Name, Contact information, and the Location of the switch through the
web management features, depending on the IP Configuration. It is recommended to change the TCP/IP
information through the Command Line Interface (CLI) initially, but it defaults to the following:
IP Configuration – Static
IP Address
– 192.168.1.201
Subnet Mask – 255.255.255.0
Gateway – 192.168.1.1