beautypg.com

Administration – snmp – B&B Electronics 9000BP - Manual User Manual

Page 28

background image

(Revised 8/4/2009) page 28 of 145

Administration – SNMP


The SNMP tab under the administration category shows a list of IP Addresses that act as SNMP

Traps. The Get, Set, and Trap Community Names are also shown here.











By selecting the modify button you will be able to change any of the fields listed. This allows the

user to set an IP address for an SNMP Trap or change the Community Names. Systems that are listed as an
SNMP Trap will be sent basic networking changes made to the switch such as ports going down or being
linked. To restore a Trap to “Value Not Configured”, enter ‘0.0.0.0’.

See also other documents in the category B&B Electronics Accessories communication: