B&B Electronics 9000BP - Manual - Manual (Page 132)

(Revised 8/4/2009) page 132 of 145
N-Ring set keepalive
Command Name n-ring set keepalive
Description Set timeout after which an N-Ring member will drop back to RSTP mode
on the N-Ring ports after loosing communication with the N-Ring manager.
Syntax n-ring set keepalive
Parameters timeout
Timeout in seconds
Examples N-TRON/Admin#[10]n-ring/set> n-ring set keepalive 40
Keep-Alive Timeout set to 40
NOTES Default is 31 seconds
N-Ring get keepalive
Command Name n-ring get keepalive
Description Get timeout after which an N-Ring member will drop back to RSTP mode
on the N-Ring ports after loosing communication with the N-Ring manager.
Syntax n-ring set keepalive
Parameters None
Examples N-TRON/Admin#[10]n-ring/get> n-ring get keepalive
Keep-Alive Timeout is 31
NOTES