B&B Electronics DSC-200_300 - Manual - Manual (Page 24)

2. Select the radio button for "Driver from disk provided by hardware manufacturer." Click
the "OK" button to continue.
3. An "Install From Disk" dialog box should pop up. Insert the diskette with the Quatech
INF files on it, select the correct drive letter, and click the "OK" button. Windows 95
automatically browses the root directory for an INF file that defines configurations for
Multi-function Adapters. If no INF files are found, click the "Browse" button and search
the Win95 sub directory on the installation diskette. You are not required to select the file
name. After finding the directory containing the INF files, Windows 95 will choose the
correct file.
4. The "New Hardware Found" dialog box will appear again, this time for an "Unknown
Device."
5. Again select the radio button for "Driver from CD provided by hardware manufacturer."
Click the "OK" button to continue.
6. Another "Install From CD" dialog box will pop up. The path should already be pointing
to the Quatech CD. Click the "OK" button to continue.
7. You should now see the "Copying Files" dialog box as Windows 95 copies the driver
files from the CD.
8. The installation utility will ask for your Windows 95 installation disks. Serial
communication ports require two drivers supplied by Microsoft to function:
SERIAL.VXD and SERIALUI.DLL. Insert the disk or CD and click "OK".
NOTE :
You may be able to skip this step if you are certain that your system has the latest
version of these files installed. If you do not have your Windows 95 install disks
immediately available, click "OK" anyway. A dialog box appears with an option
to Skip the files. Click the Skip button and the files will not be installed. This is
all right if the latest version of these drivers are currently in the
\WINDOWS\SYSTEM directory.
9. The "New Hardware Found" dialog will repeat as each serial port is registered with
Windows 95.
10. Installation is complete.
5.5 Windows NT
The Windows NT device driver is installed by running the SETUP program. Up to 256
serial ports are supported. There is a command line-based configuration utility which is used for
adding PCI bus and ISA bus serial ports. Please refer to the documentation included with the
device driver for full installation and configuration details.
Quatech DSC-200/300 User's Manual 22