B&B Electronics EIR405-T - Manual - Manual (Page 9)

Hardware Description
6 Manual Documentation Number EIR405-T – 0912m
www.bb-elec.com
www.bb-europe.com
LED Indicators
Below is a table that explains the status of each the power and network status LED’s
found on the front panel of the EIR405-T.
LED Color Description
P1 Green
On Power input 1 is active
Off Power input 1 is inactive
P2 Green
On Power input 2 is active
Off Power input 2 is inactive
Fault Red
On Power input 1 or 2 is inactive
Off
Power inputs 1 and 2 are both active, or no power is
present
Ports 1 to 5
(Upper LED)
Green
On Connected to network
Flashing Networking is active
Off Not connected to network
Ports 1 to 5
(Lower LED)
Green
On Connected to network at speed of 1000Mbps
Off Not connected to 1000Mbps network
Ports
RJ-45 ports: The RJ-45 ports auto-sense for 10, 100 or 1000 Mbps devices connections.
The auto MDI/MDIX feature allows connections to switches, workstation and other
equipment without changing straight through or crossover cabling. The charts below
show the cable pin assignments for straight through and crossover cables.