B&B Electronics LDVDSV2-S-P9D - Manual - Manual (Page 43)

OBDII Streamer Command & Response
V2.11
Page 43/49
Status Messages
Status messages are messages sent from the OBDII Streamer that weren’t expected by the
host. The status messages include error messages and vehicle status updates.
0x80 – DEVICE_CONFIGURED
Description:
A DEVICE_CONFIGURED message will be sent to the host when the OBDII Streamer
has finished detecting bus and supported parameters of the vehicle. When this message is
received the host may initiate communications.
Response:
0x01 0x01 0x80 0x00 0x82
0x81 – VEHICLE_NOT_DETECTED
Description:
The OBDII Streamer will respond to the host with a VEHICLE_NOT_DETECTED
message during startup. This command indicates that the OBDII connection is not fully
configured yet. Since configuration is automatic, no action needs to be taken to configure
the bus.
Startup configuration can take up to 1 minute after turning the key on for some vehicles.
When configuration is complete a DEVICE_CONFIGURED message will be sent to the
host.
Response:
0x01 0x01 0x81 0x00 0x83