B&B Electronics 852-10911--29 - Manual User Manual
Page 12

9
About the PoE+ Giga-McBasic
The PoE+ Giga-McBasic is a solution for private network applications that require
power over Ethernet for locations inside buildings where PoE is required to power an
Ethernet device. The standalone unit offers a model with one SFP or fixed fiber
transceiver, 1x9, uplink for the network connection, two PSE 10/100/1000Base-T
copper ports that provide Power-over-Ethernet (PoE) (IEEE802.3af) to connect a non-
PoE unit to the same fiber uplink. As a fiber-fed demarcation unit, it provides both
power and data to a remote device over a standard CAT5 copper line, eliminating the
need for a power connection to the remote device. The PoE+ Giga-McBasic
provides up to 25.4 watts per copper port and is powered by an internal power
supply, supporting 100-240 VAC.
The PoE+ Giga-Mcbasic is a solution for private network applications that require
power over Ethernet for locations inside buildings where PoE is required to power an
Ethernet device. The standalone unit offers a model with one SFP or fixed fiber
transceiver, 1x9, uplink for the network connection, one PSE 10/100/1000Base-T
copper port that provides PoE (IEEE802.3af), and one 10/100/1000Mbps copper port.
As a fiber-fed demarcation unit, it provides both power and data to a remote device
over a standard CAT5 copper line, eliminating the need for a power connection to
the remote device. The PoE+ Giga-Mcbasic provisions up to 15.4 watts on one
copper port, and can be powered by an external AC adapter or DC terminal block.
The SFP uplink can support fiber or copper SFPs. The fiber SFP, available in SC or LC
connectors, supports 100FDX or 1000FDX; a copper SFP supports the SGMII
interface (10/100/1000Mbps). The SFP, with or without DDMI, is available for
purchase through IMC Networks Distributors. The SFP must be MSA-compliant.
The copper ports auto negotiate to the connected device’s speed and duplex mode:
10 Mbps, 100 Mbps or 1000 Mbps, and HDX or FDX (including Flow Control). The
PoE+ Giga-McBasic supports jumbo frames up to 10240.
NOTE
Unless noted otherwise, any reference is applicable for both the 1x9 and SFP version of
the PoE+ Giga-McBasic in this manual.