Rainbow Electronics GE863-PY User Manual
Page 72
GE863 Hardware User Guide
1vv0300783 Rev.0 - 10/06/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 72 of 80
Placement of microvias not covered by solder resist is not recommended inside the “Solder resist
opening”, unless the microvia carry the same signal of the pad itself.
Holes in pad are allowed only for blind holes and not for through holes.
See also other documents in the category Rainbow Electronics GPS receiver:
- BT-R900 (2 pages)
- BT-R800 (2 pages)
- UC864 (36 pages)
- BT-R920 (2 pages)
- GM862-GPS (73 pages)
- GM862-GPS (120 pages)
- GM862-GPS (100 pages)
- GM862-QUAD-PY (63 pages)
- GM862-QUAD-PY (434 pages)
- GM862-QUAD-PY (68 pages)
- GM862-QUAD-PY (96 pages)
- WE865-DUAL (22 pages)
- CF-R900 (2 pages)
- BT-R820 (2 pages)
- GT863-PY (50 pages)
- ATR0610 (13 pages)
- GT864-PY (23 pages)
- FARGO MAESTRO 100 (with TCP_IP) (16 pages)
- FARGO MAESTRO 100 (with TCP_IP) (787 pages)
- ATR0622 (26 pages)
- EB-A803 (9 pages)
- GE863-GPS low power (122 pages)
- EB-A801 (18 pages)
- GE863-PRO3 (55 pages)
- L10 (2 pages)
- GM-R800 (2 pages)
- ATR0600 (11 pages)
- GM-R305 (3 pages)
- GM-R900 (2 pages)
- ATR0630 (35 pages)
- DL-200BT-D (3 pages)
- DL-200 (3 pages)
- ATR0601 (17 pages)
- ATR0620 (15 pages)
- ATR0625 (26 pages)
- MG260 (246 pages)
- MG260 (87 pages)
- DL-100 (3 pages)
- GM-R500 (2 pages)
- EB-A802 (9 pages)
- ATR0621 (20 pages)
- EB-230 (10 pages)
- GM-R306-AA (2 pages)
- 900 (239 pages)