Rainbow Electronics GE863-PY - Manual (Page 69)

GE863 Hardware User Guide
1vv0300783 Rev.0 - 10/06/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 69 of 80
12.1.1 Suggested Inhibit Area
In order to easily rework the GE863 is suggested to consider on the application a 1.5mm Inhibit area
around the module:
Top View
It is also suggested, as common rule for an SMT component, to avoid having a mechanical part of the
application in direct contact with the module.
1.5mm
1.5mm