Rainbow Electronics GE863-PY - Manual (Page 11)

GE863 Hardware User Guide
1vv0300783 Rev.0 - 10/06/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 11 of 80
BGA
Ball
Signal I/O Function
Internal
Pull up
Type
61 MRST I/O Python Debug (MRST) (1) -
62 RESERVED - RESERVED -
63 DAC_OUT O DAC out
64 GPIO16 I/O GPIO CMOS 2.8V
65 RESERVED - RESERVED -
66 MTSR I/O Python Debug (MTSR) (1) -
67 GND - Ground Power
68 TX_GPS - GPS serial Port (TX) (1) -
69 GND - Ground Power
70 RESERVED - RESERVED -
71 GPIO15 I/O GPIO -
72 GND - Ground Power
73 RX_GPS - GPS serial Port (RX) (1) -
74 RESERVED - RESERVED -
75 PPS O 1 Pulse per Second signal (1) 100kOhm pull
down
CMOS 2.8V
76 GPIO18 I/O GPIO -
77 GND - Ground Power
78 RX_GPS_BIN - GPS serial Port (RX) – SIRF BINARY (1) CMOS 2.8V
79 GND - Ground Power
80 TX_GPS_BIN - GPS serial Port (TX) – SIRF BINARY (1) CMOS 2.8V
81 RESERVED - RESERVED -
82 GND - Ground Power
83 GPS_ANT - GPS ANTENNA (1)
84 GND_GPS - GPS_ANTENNA GND (1) Power
NOTES:
(1) Available only on GE863-GPS (in case of GE863-QUAD/PY/SIM it has to be considered
RESERVED)