Rainbow Electronics GM862-QUAD-PY - Manual (Page 51)

Easy GPRS User Guide
80000ST10028 Rev. 4 - 16/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 51 of 63
3.3.2 FTP file transfer
Let’s suppose we want to send a file to a FTP server.
Define GSM context:
AT#GSMCONT=0,”IP”, "3359009000"
OK
GSM Context Activation, as response gives IP of the module:
AT#SGACT=0,1
#SGACT: 10.137.93.60
OK
Opening of FTP connection:
AT#FTPTO=1000
(FTP settings of time-out)
OK
AT#FTPOPEN=”199.188.25.77”,”userid”,”password”,0
OK
In this case the port of the FTP server is not specified, which means that it has the default value: 21
AT#FTPTYPE=0
(FTP settings of file type)
OK
FTP file transfer to the server in the file named “file.txt”:
AT#FTPPUT="file.txt"
CONNECT
(send the file)
+++
(escape sequence +++ to close the data connection)
NOCARRIER
AT#FTPCLOSE
(closing FTP connection)
OK
Deactivation of GSM context if required:
AT#SGACT=0,0
OK
3.3.3 Remote connection between two modules
In this example we send data from a module using EASY GPRS to a module using EASY GSM.
Configuration for the module that receives data (server):