Rainbow Electronics GM862-QUAD-PY - Manual (Page 14)

Easy GPRS User Guide
80000ST10028 Rev. 4 - 16/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 14 of 63
- is the precedence class
- is the delay class
- is the connection reliability class
- is the peak data transfer throughput
- is the mean data transfer throughput
Parameters assume the same values as in the previous section.
• wait for response:
Response Reason Action
OK context parameters have been
successfully stored
proceed ahead
ERROR some error occurred check parameters and retry
For example:
1- Let's assume you want to set-up the GPRS context number 1(cid) written before with your GPRS
requested QoS parameters:
Precedence class: High priority
Delay class: subscribed
Reliability class: subscribed
Peak throughput: subscribed
Mean throughput: best effort
command:
AT+CGQREQ= 1,1,0,0,0,31
response
OK
NOTE: Telit suggests to setup AT+CGQMIN=1,0,0,3,0,0