4 ftp file download from the server – Rainbow Electronics GM862-QUAD-PY User Manual
Page 33
Easy GPRS User Guide
80000ST10028 Rev. 4 - 16/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 33 of 63
AT#FTPTO=1000
(FTP settings of time-out)
OK
AT#FTPOPEN=”199.188.25.77”,”user”,”pass”,0
OK
In this case port of FTP server is not specified, which means that it has the default value: 21
AT#FTPTYPE=0
(FTP settings of file type)
OK
FTP file transfer to the server in the file named “file.txt”:
AT#FTPPUT="file.txt"
CONNECT
(send the file)
+++
(escape
sequence
+++ to close the data connection)
NOCARRIER
AT#FTPCLOSE
(closing FTP connection)
OK
Deactivation of GPRS context if required:
AT#SGACT=1,0
OK
2.2.4 FTP File download from the server
With the command AT#FTPGET=
connection and starts getting a file
If the data connection succeeds, a CONNECT indication is sent, otherwise a NO CARRIER indication
is sent. The file is received on the serial port.
Parameter:
NOTE: The command causes an ERROR result code to be returned if no FTP connection has been
opened yet.
Example:
Define PDP contest:
AT+CGDCONT=1,”IP”, "internet.wind.biz"
OK