3 at commands compatibility table – Rainbow Electronics GM862-QUAD-PY User Manual
Page 35

Easy GPRS User Guide
80000ST10028 Rev. 4 - 16/07/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 35 of 63
2.3 AT Commands Compatibility Table
Telit advises all clients that start a new application development with SW version 7.02.03 or higher to
use these new IP easy AT commands. Below you can find compatibility table for old and new
commands:
IPEasy old AT
commands
IPEasy new AT
commands
Operation
description
AT#SKTOP
AT#SGACT; AT#SD
socket open
AT#SKTD
AT#SD
socket dial
AT#SKTL
AT#SL
socket listen
AT#SKTSET
not required
AT#SKTSAV
not required
AT#GPRS
AT#SGACT
activation of
GPRS context
+++ after AT#SKTD
+++; AT#SH
+++ after AT#SKTOP
+++; AT#SH; AT#SGACT
socket close
AT#USERID
AT#SGACT
AT#PASSWD
AT#SGACT
authentication
AT#PKTSZ
AT#SCFG
AT#DSTO
AT#SCFG
AT#SKTTO
AT#SCFG
AT#SKTCT
AT#SCFG
socket
configuration
It is strongly recommended to not mix the new commands with the old ones.