Cobalt Digital COMPASS 9341 8-channel Analog Audio to AES Converter - Manual (Page 30)

3
Control and Display Descriptions
3-2 9341 PRODUCT MANUAL 9341-OM (V4.1)
Note: When a setting is changed, settings displayed on DashBoard™ (or a Remote
Control Panel) are the settings as effected by the 9341 card itself and
reported back to the remote control; the value displayed at any time is the
actual value as set on the card.
Function Submenu/Parameter Submenu Overview
The functions and related parameters available on the 9341 card are organized
into function submenus, which consist of parameter groups as shown below.
Figure 3-1 shows how the 9341 card and its submenus are organized, and also
provides an overview of how navigation is performed between cards, function
submenus, and parameters.
Figure 3-1 Function Submenu/Parameter Submenu Overview
9341
Submenu a Submenu b Submenu z • • •
Individual Parameters
Each submenu consists of groups of parameters
related to the function submenu. Using the “AES Audio
Out Pair 1/2/3/4” function submenu example, the
individual parameters for this function consist of
various audio processor parameters such as Gain,
Mute/Unmute, and so on.
If using DashBoard™ or a Remote Control Panel, the
desired 9341 card is first selected.
The desired function submenu is next selected.
Function Submenus consist of parameter groups
related to a particular 9341 card function (for
example, “AES Audio Out Pair 1/2/3/4”).