Grain Systems PNEG-1935 - Manual (Page 31)

5. Operations
PNEG-1935 Vision Hybrid for Portable Dryers 31
6. Set Time/Date: The button will display the “Set Time/Date” window.
(See Figure 5Q.)
Figure 5Q
Use the “Up” and “Down” buttons to change each of the parameters. “Accept/Exit” will save
settings and return to the “Setup Screen”.
7. Temp Scale: The button allows the user to select either English units or SI units.
Depending on what temperature scale you are now operating, this button will display a pop-up
window asking if you want to switch to SI (Celsius, metric tons, etc.) or English units
(Fahrenheit, bushels, etc.).
8. Dryer Model: This button will display the “Dryer Hardware Setup” window.
The following items must be entered correctly:
a. Number of Modules
b. Number of Fan/Heaters
c. Load System
d. Fuel
e. Dryer Length
f. Meter Roll Size: (See Figure 5R.)
Figure 5R
To edit these parameters, touch the “Select” button until a check mark appears next to the
corresponding detail specific to the dryer model.