Grain Systems PNEG-1935 - Manual (Page 27)

5. Operations
PNEG-1935 Vision Hybrid for Portable Dryers 27
4. Plenum Temp Manager: This will reduce the plenum temperature setpoint(s) if the
unload rate reaches its maximum allowable value for the time specified by the “Time Between Steps”
menu. Once the time has been exceeded, the dryer will reduce the temperature setpoint(s) by the
value given in the “Size of Temperature Step”. If the unload rate falls below the maximum allowable
value for the “Time Between Steps” period, the temperature setpoint(s) will be increased by the “Size
of Temperature Steps” until the original setpoints are met.
(See Figure 5K.)
NOTE: Default setting is “OFF”.
Figure 5K
5. Burner Mode: The button will display the “Select Burner Mode” screen. (See Figure 5L.)
Figure 5L
NOTE: The bottom heater is always Heater one.