Grain Systems PNEG-1935 - Manual (Page 16)

16 PNEG-1935 Vision Hybrid for Portable Dryers
4. Boot Screen
Boot Screen Description and Button Explanations
Turning the Control Power switch to the ON position, will start the Vision computer. The first screen to
appear will be the Boot Screen. Notice that there are four (4) buttons on the Boot Screen.
(See Figure 4A.)
Figure 4A
1. Start Dryer: This button accesses the dryer program.
2. Install Dryer Software: This button is used in updating the Vision software, which is described
further in this chapter.
3. Get Program From USB Flash: This button is used in updating the Vision software, which is
described further in this chapter.
4. Exit To Windows: This button should NOT be used in normal operation. Only the GSI Group
employees should press this button. Turn the Control Power switch OFF, then ON if this button is
inadvertently pushed to return to the regular Boot Screen.